Rako Wireless interface for mains-voltage or volt-free PIRs - RAMVR

The RAMVR accepts inputs from third party presence sensors, or other contact inputs and transmits Rako RAKOM wireless RF commands.
The RAMVR accepts either mains voltage or volt-free signals. When the RAMVR is used with presence sensors the module allows intelligent integration of sensors into a Rako wireless system.

• The RAMVR integrates third party presence sensors into a Rako wireless system where Rako's RAPIR may not be suitable, such as external use. It also allows sensors using other detection methods such as break-beam or microwaves to be used.
• The RAMVR is mains powered and allows direct connection to sensors that switch mains power. The module also has isolated volt-free inputs connections for dry contact or DC logic inputs.
• The module can be manually addressed or programmed using Rasoft Pro for more advanced programming.

• Set scene only when lights are off – Allows lights to be dimmed without the PIR overriding.
• Auto off – Turns lights off when no movement is detected.
• Exit delay – Allows users to manually turn lights off before the PIR becomes active again.
• Other Room Controllers disable Auto-Off – A manual wallplate can disable the auto-off function, allowing long periods of inactivity without turning lights off.
• The RAMVR can also be used to interface mains voltage, non-sensor type inputs into a Rako wireless system.